Here, finally, is the completed, bound quilt. Just finished stitching the curlicues in the center of the medallion. In the end I straight stitched them on the machine, a couple of stitches at a time, in order to stay on the edge of the curlicue. I had set up a single run design to stitch them out as embroideries, but each of the four corners was slightly different, and I couldn’t align the first embroidery to stitch precisely where I wanted it, so I switched to plan “b”. It took lots of twisting and turning of the quilt (thank goodness it wasn’t any larger) to get each curlicue done.
I used leftovers from the outer border strips to create blocks for the back. Their off center placement is intentional. I could have placed them somewhat closer to one another, but once the back was pinned in place I decided not to bother taking the whole thing apart to make that small adjustment.
Close-up detail of one corner – showing the embroidery in some of the “empty” blocks.
The embroideries worked out well – I did seventeen in all (one a test run to make sure the design stitched out correctly). Doing the embroidery proved challenging, not because they were particularly complex designs, but because my embroidery machine decided, at that moment, to be temperamental – the touch screen stopped working properly and precisely positioning each embroidery took patience. (The embroidery machine is now in hospital being repaired and I’m working on a borrowed machine.)
The quilt still needs a label but that can wait until I get my machine back.