Just finished. I wasn’t sure it was all going to work but it has.
If you click on the image above you will see the quilting detail. I thought about some kind of detailed quilting design but there were two problems. First, I didn’t have a hoop large enough to manage any kind of large block and there isn’t a really clear hexagonal shape to work with, even if I did. I defaulted to a diamond shape which is all I could accommodate. Second, any kind of detailed quilting, like I used on the previous diamond quilts, was going to detract from the effect of the rising, interconnected, vertical elements of the quilt design.
In the end I quilted the “diamonds” using a straight line design alternating the direction of the diamonds to fit into the overall array of interconnected elements.
Then what to do with the borders? I decided to use a rather dense floral quilt design; I set up a modified version which I used to fill in the half-diamond elements top and bottom. That decision turned out well.
I assembled a double strip of pieced strips to allow me to widen the backing enough to fit the quilt top. I bordered the insert strip with unequal strips of a light batik which blended nicely.
I finished the quilt with a narrow 1/4″ conventional quilt binding using 1 1/2″ strips from some Skyline fabric still in my stash which let me get away without having to piece a gazillion tiny leftovers from the Kaffe Fassett Collective fabrics. The binding finishes the quilt hinting at the colours in the main panel.
So, the quilt is done. I started playing with the idea on May 6 – so 2 1/2 weeks is the time it took me to construct, quilt, and complete the project. I’ve had a lot of uninterrupted time to sew since we’ve been on COVID-19 lockdown here in NS since April 25 (we expect to remain locked down until at least the middle of June – maybe longer because while new case counts aren’t going up to any degree, they’re not going down, either!).
Now it’s time to turn my attention to sewing some summer clothes – a couple of dresses, maybe a jean jacket, some linen pull-on pants. I have the fabric on hand. I’ll start by washing it all tomorrow.
I thought I had the top finished – I’d added the 7th column, finished off the ends with border fabric, and sewed a border all around.
I liked how the border accented the flow of the colour in the panel, I was fine with the finished size (~48″ x 66″). EXCEPT I was NOT happy with the partial points on the bottom left and top right!
That’s solvable one of two ways: either by cutting off the top and bottom point elements; or by adding the 8th column on the right:
I’m leaning toward the second option – I’d like the quilt top to be larger rather than smaller; I also like the top/bottom points – even if they don’t match they are complementary.
So my plan is to add the 8th column tomorrow – it means redoing the top and bottom borders because they will need to be wider to accommodate the extra column width (the length of the side border remains the same).
I didn’t want to add the 8th column – it makes the overall panel close to square (remember I don’t have enough fabric scraps to add a row (or two) to the bottom). I will do that, though, because the unattached points top and bottom are just too jarring – the top and bottom need to be symmetrical (if different).
It also means I have to come up with some kind of idea for a strip for the back – if I’d not used the 8th column on the top, I would’ve inserted it into the back. Now I need to go through the Kaffe Fassett Collective leftover fabric and come up with something that complements the quilt top.
Just finished assembling two more columns and attaching them to the previous two. This represents half of the quilt top. The top and the bottom need to be trimmed. I’d love to be able to add half blocks to the top and bottom edges but I just don’t have enough scraps of all of the fabrics to make 16 more triangles.
I’m understanding the design better now – all of the light (L) pieces have ended up on the left of the verticals, the dark (D) pieces are on the right; and the medium (M) have become the horizontal elements. Very interesting; I didn’t understand that when I started. With that information in hand I’d think about the order in which I laid out the fabrics so related fabrics would form both the light and dark portions of the verticals. That’s if I ever consider repeating this design!
My niece went “Wow!” when she saw a picture of the Escher Quilt and said she’d love to have one. I might just consider buying a kit to simplify choosing fabrics and laying them out so they create the colour flow which the original quilt displays. I’m just not sure I’m up for tackling this project again!
I just finished the first column pair using all 16 triangles (twice):
I will end up with an almost square quilt top – 48 wide x ~ 52 long. I can’t add more elements to lengthen each column because I’ve run out of some of the fabrics. So this is it. I could change the width/length ratio by assembling just 7 columns instead of 8; that’s a possibility – and then add a dark 3 1/2″ border to extend the size. I’ll make that decision after I have the 128 triangles sewn together.
I’m more pleased than I thought I would be – the Escher illusion works better than I expected it to, given I wasn’t completely lucky with my fabric colour placement – but the interwoven branching columns stand out clearly.
As I worked away at the triangle blocks for the Escher quilt I ran into a snag – I could line up the first few blocks but then I had trouble finding the next in the series. I’m pretty sure my numbers will work – but I certainly had a problem somewhere.
I could align the dark circle fabric from the first to the second triangle, I could also align the join with the yellow fabric on the right (the 2nd and 3rd stack), and even match up the red fabric above that on the left, but I reached an impasse after the 5th block! The next matching block took me back to stack A at the bottom – which it shouldn’t have done. The stacks should line up in a continuous line – all 16 of them.
I finally figured out, after spending a large part of the morning pouring over pictures of the Escher quilt and checking that I’d set up the stacks according to the table I’d been able to create from what another quilter had posted, that the third set of blocks from the bottom was pieced counterclockwise instead of clockwise!
It turns out that four of the five finished stacks of triangles which build with the triangle on the right were sewn together counterclockwise – light strip attached to triangle, medium strip to that seam, dark strip to the remaining side – NOPE – should have been light attached to triangle, DARK next, and finally the medium – to give a clockwise rotation.
Out came my seam ripper. I disassembled four sets of (8) triangles; I restitched one. I’ll get to the remaining three tomorrow. I have my fingers crossed the numbers in the table I generated from photos are correct, and once I’ve resewn those three sets of triangles with the correct rotation, the remaining unsewn blocks (6) will align correctly once I’ve assesmbled them.
Yesterday I organized my fabric into eight sets of three groupings – light, medium, dark. I cut 2″ strips from each and cut the trapezoid shapes (16 from each fabric) plus the small dark triangles for the centre of the block. (In a couple of blocks I ran out of fabric and had to fill in a couple of trapezoids with as close a colour match as I could – it will be interesting to see where they show up in the layout).
Next step was to group these trapezoids into groups of three for each block (a dark, a medium, a light). Before I did that I spent quite a bit of time looking at photos of the the quilt in progress which I found online in order to sort out the groupings. Then I set up the blocks – two sets – one which starts with the triangle on the right side of the light piece; the other with the triangle on the left side of the light piece.
These are the blocks with the triangle on the right. There is a complementary set with the triangle on the left.
In the afternoon I stitched block “A”, then block “B” and placed them together so the dark fabric forms the wide 120° angle – the two triangles at the bottom of the stack below. I also did the “C” stack but that triangle fits in somewhere else.
The next triangle needed to join the light vertical on the “B” block turned out to be block “M” followed by “L”, then “K”.
To see how this array would look like sewn together I stitched one of each together.
You can’t really see the optical illusion yet – I need to construct the second column and join it to column #1. At the moment I’ll continue constructing all the blocks then lay out the first column (it uses all 16 triangle blocks). I don’t yet know where the second column actually begins – the order of the blocks will be the same, but it will start at another place and until I get all the blocks stitched, I’m not going to know where column #2 begins.
In any case, I’ve set up a chart showing the fabrics in each triangle block – there are no duplicates, but the linkages become apparent. It will be a matter of just laying out the matching pieces to create the structure of the interlocked elements.
Now, it’s just a matter of carrying on with block construction. I’ve got six block sets done – that leaves a dozen to go and then I can set up the columns….
After I had the third diamond quilt underway I came across what’s called the “Escher” Quilt.
There are a lot of examples of this quilt online – I don’t know who developed the idea originally. The assembly creates the illusion of impossible interlocked elements. The quilter who’s photo I’ve shown below (whom I know only as “chiquitatarita”) posted photos of her quilt top in progress (she’d bought a kit using Kaffe Fassett Collective fabrics)- here she had two columns assembled where you can see the construction clearly. I even have quite a few of those particular fabrics!
I could make this simple and enrol in a class or I could buy a kit (which includes fabric, a pattern and instructions), but I decided to try on my own to see what I can construct using a relatively simple block.
Next I came across another blogger who also described how she worked with the kit she’d bought:
First we made a chart, and laid out all the fabrics, from one to eight down, and L/M/D across. After cutting, we needed to then pair up the pieces according to the chart. Each piece has a light, a medium, and a dark bar, but they’re different depending upon their relative location in the row.
This helps me figure out how to go through my fabrics and set up an 8 x 3 array as Sue describes above.
So I set out to create the basic block – it took several attempts to establish a size for the block using paper and pencil. Then I cut out bits of fabric to see if my calculations worked – they didn’t – not at first. However, I did finally manage to work out a reasonable size block which went together pretty well.
This block is one of a pair – the second one assembles in the opposite direction which lets you put the triangles together to form a connected “diamond” where the same fabric abuts to form a wide angle – you can see two in the photo below – one in brown, the second in green (I’m just working with scraps to see if I could set up a couple of blocks):
The precision issues won’t be with my cutting – I now have the dimensions I know will work. It’s my sewing that will create issues – I will have to be extremely careful to sew a “scant” 1/4″ seam. When I attach the triangle to the first trapezoid I need to stitch a partial seam – which is completed when I add the third trapezoid. Then I need to carefully press each resulting triangle so the centre triangle seams are pressed outward. Finally, I will need to press the block-joining seams open, so the assembly will lay flat. I also have to remember to create my blocks in pairs – one block having the small triangle at the left of the first trapezoid, the second having it at the right end!
Now it’s time to go through my fabrics – I want 24 – set up in eight sets of Light, Medium, and Dark. I don’t have complete colour ways sets of three but I’m sure I have enough variety in my collection of Kaffe Fassett Collective fabrics to make something that will work.